12.3 · Icon Directory

Viewers and Measuring

Line and scan viewers, measuring, scan tools and print.

Viewers: Buttons in the line and scan viewers.

Icon	Name	What it does
	Home	Fit the whole line or scan in view.
	Full screen	Open the landscape viewer.
	Survey tools	Shot, Along, Height, Closure, Area and the scan tools.
	Slice	Keep only the part of a scan between two cuts. In print mode, Cut.
	3D print	Open print mode on a scan.
	Time	Profile against time.
	Distance	Profile against distance.
	Scans	A line's pinned scans, drawn as points (Plan and 3D).
	View	Grid, compass and XYZ on and off (line viewer).

Measure tools: Icons for each measuring tool.

Icon	Name	What it does
	Single	Two points, one distance.
	Multi	A chain of points, each leg and a total.
	Height	Height difference and level distance.
	Angle	Angle from level, or of a surface through three points.
	Area	Tap around an outline: area and perimeter.
	Shot	Distance, bearing and inclination, like a survey book.
	Along	Distance following a line.
	Closure	The gap at a spot surveyed twice.
	Project	A bearing and distance from you; can become a pin (hike).

Scan survey tools: Tools for measuring inside a scan.

Icon	Name	What it does
	Clearance	Height straight up from the floor, or width across.
	Section	Cut across the passage: width, height and area.
	Drop	Depth of a pit, straight down. In workout stats, Depth.
	LRUD	Left, right, up and down from mid-passage.
	Splay burst	6, 12, 18 or 24 splays from one point.

3D print: Buttons for building and exporting prints.

Icon	Name	What it does
	Cut	Cut the scan before building.
	Edit	Tidy the built model.
	Settings	Size, Quality, Strength, Support, Color.
	Build	Make the print model.
	Export	Save the print zip (3MF, STL or OBJ).
	Move	Move the view while editing.
	Brush	Rub out what you paint over (S, M, L).
	Loose piece	Remove a loose piece.
	Undo	Step back one edit.
	Restore all	Bring back everything you edited out.